1 / 46
WEILER E 70 X 6000 Cycle Lathe
- Current bid
- Status
Total bid amount
See total breakdown
Total bid amount
See total breakdown
Max bid amount
See total breakdown
Max bid amount
See total breakdown
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- WEILER
- Type
- E 70 x 6000
- Year of build
- 2014
- Machine weight
- 12000kg
- Dimension l
- 11000mm
- Dimension w
- 2400mm
- Dimension h
- 2000mm
- Terms of delivery
- Loaded on truck
Description
Machine number: JB01
Operating voltage: 400 V
Frequency: 50 Hz
Rated current: 65 A
Connection: 45 kVA
Reading operating hours: 31,200
Control: WEILER
Center height: 360 mm
Center width: 6000 mm
Max. turning length: 6000 mm
Max. rotation diameter over bed: 720 mm
Max. circulation diameter over facing slide: 430 mm
Max. rotation diameter in the offset: 780 mm
Length of the offset in front of faceplate: 160 mm
Max. workpiece weight: 3800 kg
working pindle - spindle diameter in front bearing: 150 mm
max. face plate diameter: 630 mm
max. torque: 3150 Nm
Spindle bore: 106 mm
max. chuck diameter: 400 mm
Number of bed slides: 1
puller: 6000 mm
Chisel cross-section: 32 x 25 mm
Plane stroke: 410 mm
Tailstock quill cone: MK 6
Quill diameter: 115 mm
Max. quill stroke: 225 mm
Max. tailstock displacement: 6000 mm
Feed speed longitudinal slide: from 0.001 to 50 mm/rev
Face slide: from 0.001 to 50 mm/rev
Rapid traverse longitudinal: 10 m/min
Rapid traverse plan: 5 m/min
Speed: from 450 to 1800 rpm
The machine is equipped with a tailstock, a Multifix turning steel holder, a steady rest and a three-jaw chuck from the manufacturer SCHUNK ROTA-S, diameter: 300 mm
and an extensive batch of spare parts, a workshop drawer cabinet, a batch of clamping jaws, three further steady rests and a chip conveyor
Operating voltage: 400 V
Frequency: 50 Hz
Rated current: 65 A
Connection: 45 kVA
Reading operating hours: 31,200
Control: WEILER
Center height: 360 mm
Center width: 6000 mm
Max. turning length: 6000 mm
Max. rotation diameter over bed: 720 mm
Max. circulation diameter over facing slide: 430 mm
Max. rotation diameter in the offset: 780 mm
Length of the offset in front of faceplate: 160 mm
Max. workpiece weight: 3800 kg
working pindle - spindle diameter in front bearing: 150 mm
max. face plate diameter: 630 mm
max. torque: 3150 Nm
Spindle bore: 106 mm
max. chuck diameter: 400 mm
Number of bed slides: 1
puller: 6000 mm
Chisel cross-section: 32 x 25 mm
Plane stroke: 410 mm
Tailstock quill cone: MK 6
Quill diameter: 115 mm
Max. quill stroke: 225 mm
Max. tailstock displacement: 6000 mm
Feed speed longitudinal slide: from 0.001 to 50 mm/rev
Face slide: from 0.001 to 50 mm/rev
Rapid traverse longitudinal: 10 m/min
Rapid traverse plan: 5 m/min
Speed: from 450 to 1800 rpm
The machine is equipped with a tailstock, a Multifix turning steel holder, a steady rest and a three-jaw chuck from the manufacturer SCHUNK ROTA-S, diameter: 300 mm
and an extensive batch of spare parts, a workshop drawer cabinet, a batch of clamping jaws, three further steady rests and a chip conveyor
Remarks
used and untested
Additional details
Pick-up:
02.11. to 04.12.2026 (by appointment only)
Viewing:
14.10.2026 from 9 a.m.
Only by appointment at project.de@surplex.com
Please note that all items are sold used and untested unless expressly stated otherwise. The respective article description is decisive.
For detailed information on warranty and guarantee conditions, please refer to the auction conditions.
Note: Late or missed pickup may incur additional storage, handling, or disassembly costs that are the responsibility of the buyer.
Documents
14,096 kg
CO₂e
This is the amount of carbon emissions you could save by purchasing this item pre-owned instead of new.For comparison, an Amsterdam - Berlin flight corresponds to 78 kg CO₂e per passenger.