PBS - Tubobend 30 BF Simply Smart - Bending machines

Standard equipment: • Operation via Siemens Touch Panel KTP 600 • Function keys and plain text display for operator guidance • Internal program memory for 100 programs of 20 data sets each • Bending axis electronically controlled • Bending angle switching automatically • Setpoint and actual value display for bending angle • Control panel can be swivelled • Free-standing bending head • Pipe clamping hydraulic, clamping pressure adjustable • Hydraulic sliding piece adjustment • Hydraulic bending mandrel extension • Machine can be used on the move • Extended bending clearance for bending radii up to R max = 200 mm 1 TUBOBEND 30 with pipe extension length 1 500 mm Technical data: Tube area up to: 30.0 x 3.0 mm (E 235 with Rm = 2xD) Bending radius up to: 200 mm Control: electronic Effective bend angle (max.): 180° (+10° overbend) Shutdown accuracy: ± 0.1° Bending speed (max.):45°/s Dimensions L/ W/ H:2200 / 600 / 1100 mm Weight: approx. 500 kg Power: 1.5 kW Connection data: 400 V / 50 Hz / 3 phases Mains fuse: CEE 16 A Optional equipment 1 pc. length stop device length 1500 mm 1 pc. Premature mandrel retraction to optimize sheet quality • For the use of ball mandrels • Adjustment up to 10° infinitely programmable 1 pc. Automatic mandrel lubrication as minimum quantity lubrication Pneumatic dosing unit HP-Microspray (compressed air connection required) 1 Pc. Safety Foot Switch for Function Clamping and Bending 1 pc Adjustable bending speed Note/Note: The tube is about 500mm round at the beginning and end of the bend (Tube and tool = Ø 33.7mm). The tube is only pressed flat onto the flat oval tube in the spiral. The spiral only gets one arch at the end. Lobjzichajquvy Aroad It is not possible to bend envelope sheets. Because the tube is round, pre-rotation can be done to compensate for the slope. The position of the bend or spiral must be worked out by yourself using a device.