Shrink Tunnel

Suitable for packaging with shrink plastic film vs. 5 liter containers in the 2x2 format without cardboard support Production 10-12 packs per 1st The system consists of: - Feeding belt arranged at 90°, with 2 lanes, coming out of the 2000 mm line centerline. inverter-controlled - Side product containment guides - Vibrator unit to facilitate the channeling of the bottles inside the aisles controlled by Variable speed drive - Bottle sorting unit - Bottle retraction unit before being pushed by the pusher -In-line pneumatic pusher with pre-assembly •700 mm "hot bar" type sealing bar. pneumatic piston driven, with device Security - Temperature control of the sealing bar with integrated proportional electronic temperature controller with alarm threshold (until the set operating temperature is reached, the machine does not work automatically) - Safety photocell with sealing bar lock in case an obstacle is found in its path -Useful passage under the sealing bar 380 mm - Pneumatic packing box -Max. sizes of polyethylene shrink film reel Usable flat sheet band 680 mm - diameter 350 mm. - thickness from 35 to 1000 microns - Automatic upper film unwinding device with acoustic and light signal of the end of the film reel - Automatic film and lower unwinding device on removable carriage on the operator side with acoustic and light signal of the end of the film reel - Welding control not carried out - Breakage or lack of film control - 400 mm long evacuation belt controlled by variable speed motor - Retraction tunnel, with chamber length of 1500 mm insulated with rock wool and heated by 6 armoured heating elements of 4000 watts each, with passage opening mm. 600 x400 (height) -Forced ventilation with air recycling