1 / 18
PRIMA POWER - CV 5000 - 2016 - Laser cutting machine
- Current bid
- Status
€
Total bid amount
See total breakdown
Total bid amount
See total breakdown
€
Max bid amount
See total breakdown
Max bid amount
See total breakdown
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- PRIMA POWER
- Type
- CV 5000
- Year of build
- 2016
- Serial number
- 1040-11100/26
- Terms of delivery
- Loaded on truck
Description
Laser Machine Prima Power CV 5000
Year of Make: 2016Additional equipment
Donaldson Welding Fume Extraction: Donaldson Torit 2DFP6Year of Make: 2016
3.1. CV Series CO₂ Laser Specifications (CV 5000)
Average power: 200 W – 5,000 WPeak power: up to 6 kW
Wavelength: 10.6 microns
Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3)
Beam divergence: 1.5 mrad (half angle)
Beam diameter at output: 15 mm 1/e², 21 mm solid beam
Pulse operation – pulse repetition rate: 0 – 2 kHz
Pulse width: 250 microseconds, 70 μs resolution
Alignment stability: +/- 150 μrad
Operating conditions:
Ambient temperature (max.): 40 °C
Ambient temperature (min.): 10 °C
Relative humidity: < 95% (non-condensing)
Diode laser:
Wavelength: 635 nm
Output Power: < 1mW
3.2. CV Series CO₂ Laser Supply Specifications (CV 5000)
Electrical:Power: 37 kW
Voltage: 400 VAC – 460 VAC ±10%, 3-phase
Cooling:
Required cooling capacity: 45 kW
Flow rate: 133 L/min (35 GPM)
Input temperature: 18 – 20 °C
Maximum inlet pressure: 6 bar
Nominal inlet pressure: 3 bar
Differential pressure: 1.5 bar
Cooling medium: Distilled water with 35% Dowfrost HD
Filter requirement: 100 microns
Gas:
He: 99.996 % | 67.7% | 13.4 – 46.8 SLPH
CO₂: 99.995 % | 4.1% | 0.9 – 3.0 SLPH
N₂: 99.996% | 28.2 % | 5.8 – 20.2 SLPH
Total consumption: 20 – 70 SLPH (variable)
Remarks
Condition: Used / Very good
Viewing desired
Viewing desired
Additional details
Loading conditions: see article specifications
Stacker available on site.
Pick-up possible on June 16 and 17 (8 a.m. - 4 p.m.) ONLY BY APPOINTMENT
E-mail address for pre-registration see invoice (last page).
Business buyers from the European Union (EU) and non-EU countries (third countries) are obliged to pay a deposit to Troostwijk Deutschland on their total purchase. This deposit is calculated on the basis of the VAT rate applicable in the Federal Republic of Germany. After confirmation that the purchased lot has left the EU, the deposit will be returned to the buyer:
• EU buyers must complete a completed confirmation of success [download the template "Template_Intra-Community Supply (DE-EN)" attached here] to Troostwijk Germany and return the deposit to export.de@troostwijkauctions.com in order to receive a refund.
• Non-EU buyers must return a copy of the electronic export declaration (EX-A with MRN - for verification only) or, if the value of the goods is lower, a completed export declaration with a stamp from the EU border customs office to export.de@troostwijkauctions.com in order to get the deposit refunded.
