PharmaTest - ptz auto 3 - disintegration test instrument - 2008

The AUTO 3 PTZ decay test instrument is equipped in full compliance with the requirements of the USP <701/2040> and EP <2.9.1/2.9.2.1> pharmacopoeias A large 320x240 pixel LCD display and alphanumeric keypad allow for editing of product and test information, such as the disintegration time for each station, bath and medium temperature. The total test time for the station is displayed at the end of a run. The operator's intervention to stop a run is also displayed. Print the individual decay time of each sample when you have visually detected the decay of the sample under test by simply pressing the corresponding character key (1-6). All of this information can be printed as a test report when a PCL printer is connected to the parallel printer port of the instruments. Built-in heating system uses a quiet circulation pump and heating element to preheat the outdoor water bath on a range of 25 to 45 °C ; The actual bath temperature is always displayed and measured by an external manual temperature probe. Overheating protection ensures automatic shut-off of the pump and heating element in the event of no water flow detection. One Built-in safety system including overheat detection sensor, thermoswitch and Thermal fuse shuts off the heating when the temperature exceeds +60 °C or 95 °C max. heating element level.