1 / 8
HURCO - 2004 - VM1 – Vertical CNC Machining Center
- Current bid
- Status
€
Total bid amount
See total breakdown
Total bid amount
See total breakdown
€
Max bid amount
See total breakdown
Max bid amount
See total breakdown
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- HURCO
- Type
- VM1
- Year of build
- 2004
- Serial number
- VM1-06216034BEA
- Travel x-axis
- 600mm
- Travel y-axis
- 355mm
- Travel z-axis
- 455mm
- Taper
- SK40
- Speed till n=
- 8000rpm
- Table size l
- 355mm
- Table size w
- 765mm
- Workpiece weight max.
- 1000kg
- CNC control, brand, type
- Hurco Ultimax
- Electric connection
- 400V
- Machine weight
- 3000kg
- Dimension l
- 2000mm
- Dimension w
- 2200mm
- Dimension h
- 2400mm
Description
Hurco VM1 3-axis vertical CNC machining center for metalworking; suitable for milling, drilling and tapping; equipped with Hurco Ultimax steering; working range X/Y/Z 600 x 355 x 455 mm; magazine capacity 16 positions; year of construction 2004; approximately 21,000 operating hours; 400 V power (3-phase, 50 Hz) connection; full load 13 kVA; largest motor 7.4 kVA; Machine dimensions approx. 2100 x 1950 x 2400 mm (L x W x H, with top lamp). The machine has been used daily until fairly recently and works accurately. Defective oil seal of the switch arm, causing oil to leak. In case of frequent use, the hydraulic oil (Tellus 32) should be topped up approximately once every 2 weeks. For flawless operation, the oil barrier must be replaced.
Remarks
Please note: watch by appointment via kijkdag@vdc-group.nl.
Additional details
Er is geen herroepingsrecht.
De minimumleeftijd voor het bezoeken van de kijk- en uitleverdagen is 18 jaar. Bezoekers moeten zich kunnen identificeren.
Tijdens de afhaaldag is op de locatie Zwaag en Drunen een vorkheftruck met chauffeur beschikbaar, die kosteloos gebruikt kan worden.
De maximale hefcapaciteit op de locatie Zwaag bedraagt 7 ton en op de locatie Drunen 4 ton.
Gebruik van de vorkheftruck geschiedt geheel op eigen risico. Daarnaast kunnen zich wachttijden voordoen.
2,590 kg
CO₂e
This is the amount of carbon emissions you could save by purchasing this item pre-owned instead of new.For comparison, an Amsterdam - Berlin flight corresponds to 78 kg CO₂e per passenger.
