1 / 4
HOMAG - BHX 500 - CNC drilling machine - 2018
- Current bid
- Status
Total bid amount
See total breakdown
Total bid amount
See total breakdown
Max bid amount
See total breakdown
Max bid amount
See total breakdown
Lot specifications
- Quantity
- 1
- Margin
- Yes
- Brand
- HOMAG
- Type
- BHX 500
- Year of build
- 2018
- Terms of delivery
- Ex foundation-unpackaged
Description
X-axis working area 2500 mm
Y-axis working area 1300 mm
Main electrospindle power 6 KW
Number of axes controlled 3 axes
Total number of drilling spindles 84
X-axis working area 2500 mm
Y-axis working area 1300 mm
Maximum workpiece throughput 80 mm
Workspaces 1
Workpiece holding pliers yes
2
pliers Automatic panel loading system yes
Motorized
transfer Automatic panel unloading system yes
With motorized
transfer Drilling operator unit 2
DRILLING OPERATOR UNIT 1
Group: Top
Spindles for vertical drilling: 32
Spindles for horizontal drilling in the X direction: 2
Spindles for horizontal drilling in the Y direction: 8
Total number of vertical + horizontal spindles: 42
DRILLING OPERATOR UNIT 2
Group: Lower
Spindles for vertical drilling: 32
Spindles for horizontal drilling in the X direction: 2
Spindles for horizontal drilling in the Y direction: 8
Total number of vertical + horizontal spindles: 42
Milling units 2
MILLING OPERATING UNITS 1
Group: Top
No. of axes checked: 3
Motor power: 6 kw
RPM: 18000 RPM
MILLING OPERATING UNITS 2
Group: Lower
Controlled axes: 3
Motor power : 6 kw
RPM: 18000 RPM
Blade assembly 2
BLADE ASSEMBLY 1
Group: Top
Blade Assembly: Yes
Group: with 0/90 degree
position BLADE ASSEMBLY 2
Group: Lower
Blade Assembly: Yes
Group : with 0 / 90 degree
position WINDOWS
control system WOODWOP
machine programming software CE marked safety regulation yes
Protective structure of operating
units with safety sensors yes
Protective nets attached to the machine yes
Total installed power 19 KW
Y-axis working area 1300 mm
Main electrospindle power 6 KW
Number of axes controlled 3 axes
Total number of drilling spindles 84
X-axis working area 2500 mm
Y-axis working area 1300 mm
Maximum workpiece throughput 80 mm
Workspaces 1
Workpiece holding pliers yes
2
pliers Automatic panel loading system yes
Motorized
transfer Automatic panel unloading system yes
With motorized
transfer Drilling operator unit 2
DRILLING OPERATOR UNIT 1
Group: Top
Spindles for vertical drilling: 32
Spindles for horizontal drilling in the X direction: 2
Spindles for horizontal drilling in the Y direction: 8
Total number of vertical + horizontal spindles: 42
DRILLING OPERATOR UNIT 2
Group: Lower
Spindles for vertical drilling: 32
Spindles for horizontal drilling in the X direction: 2
Spindles for horizontal drilling in the Y direction: 8
Total number of vertical + horizontal spindles: 42
Milling units 2
MILLING OPERATING UNITS 1
Group: Top
No. of axes checked: 3
Motor power: 6 kw
RPM: 18000 RPM
MILLING OPERATING UNITS 2
Group: Lower
Controlled axes: 3
Motor power : 6 kw
RPM: 18000 RPM
Blade assembly 2
BLADE ASSEMBLY 1
Group: Top
Blade Assembly: Yes
Group: with 0/90 degree
position BLADE ASSEMBLY 2
Group: Lower
Blade Assembly: Yes
Group : with 0 / 90 degree
position WINDOWS
control system WOODWOP
machine programming software CE marked safety regulation yes
Protective structure of operating
units with safety sensors yes
Protective nets attached to the machine yes
Total installed power 19 KW
Remarks
Last date for batch collection: 31/07/2026
The machine is sold and supplied in the state of fact and law in which it is ("seen and liked"), on the basis of photographic documentation and technical/commercial material provided exclusively for descriptive purposes. The Buyer has the right to inspect the asset prior to collection and assumes all responsibility relating to the installation, compliance with safety regulations and use of the machinery at the destination site.
