1 / 5
BIESSE - ROVER A 1332 ATS EDGE - CNC edge bander - 2013
- Current bid
- Status
Total bid amount
See total breakdown
Total bid amount
See total breakdown
Max bid amount
See total breakdown
Max bid amount
See total breakdown
Lot specifications
- Quantity
- 1
- Margin
- Yes
- Brand
- BIESSE
- Type
- ROVER A 1332 ATS EDGE
- Year of build
- 2013
- Panel thickness
- 14-60mm
Description
Working area X axis 3280 (2300 for edgebanding) mm
Y-axis working area 1320 (1240 for edgebanding) mm
Bar worktop with suction cups
Main electrospindle power 13 KW
5
controlled axes Maximum edge height 65 mm
Total drilling spindles 24
Total tool change position 16
Working area X axis 3280 (2300 for edgebanding) mm
Y-axis working area 1320 (1240 for edgebanding) mm
Maximum workpiece throughput 180 mm
Workspaces 2
Worktop: yes
Bar worktop with suction cups
Suction cup bars 6
Vacuum pump yes
Nr. Pumps 1
Single capacity 250 m3/h
DRILLING OPERATOR UNIT 1
Group: Top
Spindles for vertical drilling: 16
Spindles for horizontal drilling in the X direction: 4
Horizontal drilling spindles in the Y direction: 4
Total vertical + horizontal spindles: 24
MILLING OPERATING UNITS 1
Group: Top
Controlled axes: 5
Automatic tool changer: yes
Liquid cooling system: Yes
Motor power: 13 kw
EDGEBANDING OPERATING UNITS 1
Gluing group: yes
Positioning: Mounted on the main beam of the machine
Glue pot for hot-melt glue: yes
Edge Storage: Yes
Workstations: 2
BLADE ASSEMBLY 1
Group: Top
Blade Assembly: Yes
Group: Fixed to run channels in the X
direction Max. tool diameter: 120 mm BLADE ASSEMBLY 2
Group: Top
Blade Assembly: Yes
Group: Fixed to run channels in the Y
direction Max. tool diameter: 120 mm
TOOL MAGAZINE 1
Positions: 16
Tool: Positioned on the back of the machine
BiesseWorks
machine programming software CE marked safety regulation yes
Protective nets attached to the machine yes
Safety system Front
safety mats
Y-axis working area 1320 (1240 for edgebanding) mm
Bar worktop with suction cups
Main electrospindle power 13 KW
5
controlled axes Maximum edge height 65 mm
Total drilling spindles 24
Total tool change position 16
Working area X axis 3280 (2300 for edgebanding) mm
Y-axis working area 1320 (1240 for edgebanding) mm
Maximum workpiece throughput 180 mm
Workspaces 2
Worktop: yes
Bar worktop with suction cups
Suction cup bars 6
Vacuum pump yes
Nr. Pumps 1
Single capacity 250 m3/h
DRILLING OPERATOR UNIT 1
Group: Top
Spindles for vertical drilling: 16
Spindles for horizontal drilling in the X direction: 4
Horizontal drilling spindles in the Y direction: 4
Total vertical + horizontal spindles: 24
MILLING OPERATING UNITS 1
Group: Top
Controlled axes: 5
Automatic tool changer: yes
Liquid cooling system: Yes
Motor power: 13 kw
EDGEBANDING OPERATING UNITS 1
Gluing group: yes
Positioning: Mounted on the main beam of the machine
Glue pot for hot-melt glue: yes
Edge Storage: Yes
Workstations: 2
BLADE ASSEMBLY 1
Group: Top
Blade Assembly: Yes
Group: Fixed to run channels in the X
direction Max. tool diameter: 120 mm BLADE ASSEMBLY 2
Group: Top
Blade Assembly: Yes
Group: Fixed to run channels in the Y
direction Max. tool diameter: 120 mm
TOOL MAGAZINE 1
Positions: 16
Tool: Positioned on the back of the machine
BiesseWorks
machine programming software CE marked safety regulation yes
Protective nets attached to the machine yes
Safety system Front
safety mats
Remarks
Last date for batch collection: 31/07/2026
The machine is sold and supplied in the state of fact and law in which it is ("seen and liked"), on the basis of photographic documentation and technical/commercial material provided exclusively for descriptive purposes. The Buyer has the right to inspect the asset prior to collection and assumes all responsibility relating to the installation, compliance with safety regulations and use of the machinery at the destination site.
