1 / 6
2019 SIECC LC460 Universal lathe
- Current bid
- Status
€
Total bid amount
See total breakdown
Total bid amount
See total breakdown
€
Max bid amount
See total breakdown
Max bid amount
See total breakdown
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- SIECC
- Type
- LC460
- Year of build
- 2019
- Terms of delivery
- Loaded on truck
Description
Machine type: Conventional centre lathe
Centre distance: 1,000 mm
Max. swing over bed: 460 mm
Max. swing over cross slide: 274 mm
Max. swing over gap: 690 mm
Effective gap length: 165 mm
Bed width: 300 mm
Headstock
Spindle bore: 58 mm (82 mm optional)
Spindle nose: ISO-D6
Spindle taper: MT6
Spindle speed range: 25 – 2,000 rpm (12 steps)
Feeds and threading
Top slide travel: 120 mm
Cross slide travel: 290 mm
Max. tool shank size: 25 × 25 mm
Metric threads: 41 ranges, 0.1 – 14 mm
Inch threads: 60 ranges, 2 – 112 TPI
Longitudinal feeds (metric): 42 ranges, 0.031 – 1.7 mm/rev
Longitudinal feeds (inch): 42 ranges, 0.0011 – 0.0633 in/rev
Cross feeds (metric): 42 ranges, 0.014 – 0.784 mm/rev
Cross feeds (inch): 42 ranges, 0.00033 – 0.01873 in/rev
Module threads: 34 ranges, 0.1 – 7 m
Diametral threads: 50 ranges, 4 – 112 DP
Tailstock
Quill diameter: 60 mm
Quill taper: MT4
Quill travel: 128 mm
Power
Main drive motor: 5.5 kW
Coolant pump motor: 0.09 kW
Electrical supply: 380 V / 50 Hz
Overall dimensions (L×W×H): approx. 2,350 × 1,120 × 1,800 mm
Own mass: approx. 1,900 kg
Condition: Used conventional lathe in working condition. Normal wear consistent with age and use.
approx working hours around 20
Centre distance: 1,000 mm
Max. swing over bed: 460 mm
Max. swing over cross slide: 274 mm
Max. swing over gap: 690 mm
Effective gap length: 165 mm
Bed width: 300 mm
Headstock
Spindle bore: 58 mm (82 mm optional)
Spindle nose: ISO-D6
Spindle taper: MT6
Spindle speed range: 25 – 2,000 rpm (12 steps)
Feeds and threading
Top slide travel: 120 mm
Cross slide travel: 290 mm
Max. tool shank size: 25 × 25 mm
Metric threads: 41 ranges, 0.1 – 14 mm
Inch threads: 60 ranges, 2 – 112 TPI
Longitudinal feeds (metric): 42 ranges, 0.031 – 1.7 mm/rev
Longitudinal feeds (inch): 42 ranges, 0.0011 – 0.0633 in/rev
Cross feeds (metric): 42 ranges, 0.014 – 0.784 mm/rev
Cross feeds (inch): 42 ranges, 0.00033 – 0.01873 in/rev
Module threads: 34 ranges, 0.1 – 7 m
Diametral threads: 50 ranges, 4 – 112 DP
Tailstock
Quill diameter: 60 mm
Quill taper: MT4
Quill travel: 128 mm
Power
Main drive motor: 5.5 kW
Coolant pump motor: 0.09 kW
Electrical supply: 380 V / 50 Hz
Overall dimensions (L×W×H): approx. 2,350 × 1,120 × 1,800 mm
Own mass: approx. 1,900 kg
Condition: Used conventional lathe in working condition. Normal wear consistent with age and use.
approx working hours around 20
Remarks
Unchecked
Documents
18,516 kg
CO₂e
This is the amount of carbon emissions you could save by purchasing this item pre-owned instead of new.For comparison, an Amsterdam - Berlin flight corresponds to 78 kg CO₂e per passenger.
