1 / 20
OERLIKON - SKM 1 - Spiral Bevel Gear Cutting Machine
- Current bid
- Status
€
Total bid amount
See total breakdown
Total bid amount
See total breakdown
€
Max bid amount
See total breakdown
Max bid amount
See total breakdown
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- OERLIKON
- Type
- SKM 1
- Year of build
- 1979
- Serial number
- 288446
- Machine weight
- 6800kg
- Dimension l
- 3000mm
- Dimension w
- 2000mm
- Dimension h
- 2200mm
- Terms of delivery
- Free loaded in container
Description
Wheel diameter - max. 320 mm
Wheel width 50 mm
Module - max. 7.5
Module - min. 2.1
Tooth width max. 50 mm
Adjustment range for hypoid wheels (offset) +/- 60 mm.
Through-hole spindle pieces 78 mm.
Dive max 20 mm.
Cut feeds, infinitely variable 0.04 - 25 mm/min.
Distance cone tip/workpiece spindle... 100 - 345 mm.
Distance between cone centre and cutter head axis 25 - 150 mm.
Distance taper center/milling head spindle... 80 - 220 mm.
Max. crown gear Ø at medium spiral angle... 320 mm.
Max. gear ratio 1 : 9.5
Module 2.1 - 7.5
Outer cone spacing approx. 170 mm.
Rapid traverse 1.5 m/min.
Roller feeds in minutes from angle pe... 0.3 - 20
Spindle nose with short taper, inside 140 mm.
Spindle nose with short taper, outside 85 mm.
Spindle speeds in standardized steps 40-250 rpm.
Rotation around the machine center axis 90º
Ø max. gearbox 320 mm.
Ø of the spindle nose 130 mm
Electrical properties
Engine cooling power 1.2 Cv.
Power main motor 10 Cv.
Motor power chip conveyor 0.3 hp.
Engine power forward 2 hp.
Power hydraulic motor 2 hp.
Total power 13 Kw.
Voltage 220/380V.
Loading assistance flat rate €1500,-
Wheel width 50 mm
Module - max. 7.5
Module - min. 2.1
Tooth width max. 50 mm
Adjustment range for hypoid wheels (offset) +/- 60 mm.
Through-hole spindle pieces 78 mm.
Dive max 20 mm.
Cut feeds, infinitely variable 0.04 - 25 mm/min.
Distance cone tip/workpiece spindle... 100 - 345 mm.
Distance between cone centre and cutter head axis 25 - 150 mm.
Distance taper center/milling head spindle... 80 - 220 mm.
Max. crown gear Ø at medium spiral angle... 320 mm.
Max. gear ratio 1 : 9.5
Module 2.1 - 7.5
Outer cone spacing approx. 170 mm.
Rapid traverse 1.5 m/min.
Roller feeds in minutes from angle pe... 0.3 - 20
Spindle nose with short taper, inside 140 mm.
Spindle nose with short taper, outside 85 mm.
Spindle speeds in standardized steps 40-250 rpm.
Rotation around the machine center axis 90º
Ø max. gearbox 320 mm.
Ø of the spindle nose 130 mm
Electrical properties
Engine cooling power 1.2 Cv.
Power main motor 10 Cv.
Motor power chip conveyor 0.3 hp.
Engine power forward 2 hp.
Power hydraulic motor 2 hp.
Total power 13 Kw.
Voltage 220/380V.
Loading assistance flat rate €1500,-
Additional details
VIEWING takes place only with advance registration by e-mail: info@machines-mw.at
PAYMENT is due immediately upon receipt of the surcharges. Payment instruction is stored in www.troostwijkauctions.com / My Purchases / Payment (Checkout). Online payment possible. Bank transfer takes at least 2 full business days!!
PACKING: Prepared for safe transport, but without seaworthy wooden crate packaging
LOADING: Charged as additional costs, it is only carried out if a suitable vehicle has been organized by the buyer.
DELIVERY CONDITION: FCA
Payment Process
We strongly advise you to take a viewing day to inspect the lots you are interested in on site before placing a bid. Both the buyer and the person commissioned by him can take part in the inspection by appointment. The tickets are bought - "as seen". This means that the lots are not checked and no guarantee is given for function and completeness, unless this is expressly stated in the lot description. Since bids cannot be canceled, it is important that you make an informed decision about placing a bid. If you are picking up a lot and have specific questions or concerns, please contact the on-site staff immediately. If you have already collected the lot and would like to contact us afterwards with a question or problem, please note that we may not be able to help you if it is something that you could/should have noticed during the viewing.
Payment Process
We strongly advise you to take a viewing day to inspect the lots you are interested in on site before placing a bid. Both the buyer and the person commissioned by him can take part in the inspection by appointment. The tickets are bought - "as seen". This means that the lots are not checked and no guarantee is given for function and completeness, unless this is expressly stated in the lot description. Since bids cannot be canceled, it is important that you make an informed decision about placing a bid. If you are picking up a lot and have specific questions or concerns, please contact the on-site staff immediately. If you have already collected the lot and would like to contact us afterwards with a question or problem, please note that we may not be able to help you if it is something that you could/should have noticed during the viewing.
Videos
See the details and take a closer look at the item in this video.
