Refrigeration and ventilation system COLT INDUSTRIES

Complete cooling and ventilation system, consisting of approximately 125 lpm square/rectangular stainless steel pipes/ducts for cooling in various sizes, located at approximately 9 to 10 lpm height in the extrusion hall, including divided into 3 configurations/circuits, 1 of which with 5x strips with pipes/ducts from ceiling height downwards, each of approximately 9 lpm height including the necessary bends and at the bottom each equipped with a filter grid module complete with 2 central ducts over the width of the hall of which this one with an extra mixed air and fan module at the top and 2 with 3x a ditto version along the other hall side. Both equipped with mixed air and fan module at the top of the circuits with exit to the outside along the roof. These 3 openings must be closed by the buyer after dismantling the system/installation. Also equipped with 2 large cooling/ventilation units/modules COOLSTREAM A type model CSTR IP54, with mixed air and fan module, located outside on the roof. Accompanying photos for reference. Complete with control box/switch box on the wall in extrusion hall. Manual and diagram available for this installation.