FAMAR - ERGO 500 - CNC lathe - 2001
- Lotto:
- A1-20763-23
- Schwäbisch Gmünd, DE
Ritiro su appuntamento
- Offerta attuale
- Stato
| IVA | ||
|---|---|---|
| Costo dell'asta | ||
| IVA in aggiunta al costo dell'asta | ||
| Totale da pagare | ||
Informazioni su questo lotto
CNC control SIEMENS SINUMERIK 840D;
Workspace:
Standard chuck diameter [mm] 500,
Max. chuck diameter [mm] 630,
Nominal turning diameter [mm] 450,
Max. turning diameter [mm] 660,
Max. swivel diameter [mm] 660,
Max. rotation length [mm] 300,
Axle drive:
Total stroke X-axis [mm] 1180,
Working stroke X-axis [mm] 370,
Total stroke Z-axis [mm] 400,
Speed X-axis [m/min] 50,
Speed Z-axis [m/min] 45,
X-axis ball screw diameter [mm] 50,
Z-axis ball screw diameter [mm] 50,
X-axis feed force [kN] 7,
Z-axis feed force [kN] 9.4,
S3-25% X-axis feed [kN] 22.2,
S3-25% Z-axis feed [kN] 25.1,
electrospindle,
Spindle nose [ASA] 11,
Front bearing ø [mm] 170,
Nominal power [kW] 28.8,
Nominal torque [Nm] 550,
Max. power [kW] 36,
Max. torque [Nm] 783,
Max. speed [um] 3200,
Powered wkz. turret,
Serrage outils [VDI] 50,
Tool quantity [N°] 12,
Max. power [kW] 22.4,
Max. torque[Nm] 145,
Max. speed [around] 8000/10000,
Max. Wkz length [mm] 220,
Tool change time [sec] 0.25,
Machine data:
Loading/unloading time [sec] 6 - 10,
Machine weight [kg] 16000 Approx,
Main connection [V/Hz] 400/50 or 440/60,
Air pressure [bar] 5,
Lifting height [mm] 1050,
Length/width/height [mm] (without chip conveyor): 3200/2450/3150.
The additional costs are dismantling and loading costs.
- Osservazioni:
- Was energized until the end and ran flawlessly.
- Numero del lotto:
- A1-20763-23
- Posizione:
- Schwäbisch Gmünd, DE
- Venduto da:
- Venditore aziendale
Specifiche del lotto
- Quantità
- 1
- Margine
- No
- Type
- ERGO 500
- Year of build
- 2001
- Brand
- FAMAR
Troostwijk is not the seller, but auctions as an intermediary on behalf of a third party.
